The older model G6A6 water heater is no longer available however, we do have the Atwood RV Water Heater - Gas and Electric with Automatic Pilot - 120 Volt - 10,000 Btu - 6 Gal Tank, # DMC74FR. This has dimensions of 12-3/4L x 12-3/4W x 19-7/8D Inch..
We also have the Atwood RV Water Heater Gas and Electric with a 10 Gal Tank, # AT94022. This also is a 10,000 Btu water heater with same dimensions of 16" tall x 15-1/2" wide x 20-7/8" deep. The door dimensions are 17-3/4" tall x 18" wide.... view full answer...
Yes, there is a sliding base option available. The RVB3300 comes back to the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch # BWRVB3300 which fits the Ford 5th Wheel Prep Package.
The correct sliding base for your B&W Companion hitch head that fits in the Ford Prep Package is the Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch # BWRVB3370. view full answer...
Yes, we do have some "H" channel that is designed to be used for enclosed trailer cabinets and doors.
- H-Channel for Enclosed Trailer # 36281-955
The # 36281-955 measures 93-1/2" long x 2" tall x 1-1/8" deep and can be cut to fit your needs. view full answer...
We have two available TracRac ladder racks with a 500 and 750 lb weight capacities for your 2008 E350. For a 500 lb capacity, use part # TH29055XT or for a 750 lb capacity, use part # TH29056XT.
The # RA-28 you referenced is meant to be installed on a trailer, not a vehicle.
I have linked you to the installation details. view full answer...
I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 26-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers.
I would check your tail gate measurements before ordering. view full answer...
Brake controllers are universal items and are not vehicle specific. Newer trucks will have brake controller ports to simplify wiring, but the brake controllers are the same. I have included a link to a page on general brake controller information and on wiring and installing brake controllers that should be very useful for you.
Our most popular brake controller is the Tekonsha Prodigy P2, part # 90885. It sells so well because how of how easy it is to setup and how well it works. view full answer...
For this particular cooler, you would need to use a probe thermostat like part # D16759. This kit has an adjustable turn-on temperature range from 150-240*F. The turn-off is set at 10* lower than the turn on. view full answer...
You could the 25 inch long hydraulic brake line with fittings, part # T0980100. You would just need to connect the line to your actuator master cylinder to route brake fluid to your trailer brakes. The fittings are included.
We offer the flexible line in a few different lengths as well. For example # T0777300 is 13 inches long. view full answer...
The only underbed fifth wheel installation kit that we carry for your 2001 Dodge Ram 2500 is the B&W Turnover Ball Gooseneck Hitch, # BWGNRK1394-5W and the B&W Companion Sliding Fifth Wheel Hitch, # BWRVK3400-5W.
Reese used to make an Elite Series underbed fifth wheel kit for your truck, but it has been discontinued. The install kit you referenced, part # RP30064 is for a Ford truck.
To view the install instructions for the B&W kit, click on the provided link. view full answer...
There is no way to find an exact replacement. The replacement fenders we carry are built as universal items that you would fit based on tire size. I would replace both of the fenders when you buy the boat so that they will match.
We have both plastic and metal, steel and aluminum, fenders. I have added a link to a page that has all our trailer fenders. At the top of the page you will be given options to narrow down the parts till you find the ones you want. It will start with tire size,... view full answer...
You bet we do! For the LED version, you'll need part # AL91RB. The lamp can be grommet mounted using # A91GB or surface mounted using a self grounding base like # A91BB for black/ # A91CB for chrome or a standard base like part # A91BOB for black/ # A91OB for chrome.
If you use a self grounding base, use the single wire pigtail, part # A91LW or for the standard base, use the two wire pigtail, part # A49PB. view full answer...
MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve - 2 Model 250 Quick Disconnect Ports # 103538-MBS would be what you're looking for, this allows you to connect an auxiliary cylinder to your RV's propane system. view full answer...
The # 391AUDA417 for Stealth Hitches is a custom fit - 2" hitch for the 2017 Audi A4. This hitch will work with the Thule Helium Pro 3 Bike Rack for 1-1/4" and 2" Hitches, # TH9043PRO. The # 391AUDA417 Stealth Hitch has a 350 lb. TW so you will be able to take full advantage of the max capability of the Thule Helium Pro 3. view full answer...
The Go Power DuraLite Portable Solar Panel with Digital Solar Controller, # GP66FR is a lightweight, portable solar charging system rated at 100 watts max. Under optimum conditions this will put out 5.06 amps from the solar panel. You can connect multiple panels to the controller as it is capable of up to 30 amp input. Use the Go Power 100 Watt Panel Expansion, # GP76FR.
Yes, you can connect this to the vehicle battery, using the battery clamp connection, to apply a charge same as you... view full answer...
The glass is not sold separately so you will need to go with the complete assembly. Replacement Stainless Steel Top with Glass Cover # C-FSRE21SA-SS-003 is a fit for Furrion 2-in-1 Range Oven FSRE17SASS or FSRE21SASS. view full answer...
Weight distribution systems that advertise as having friction sway control built into the heads and spring bars of the system should not be lubricated at those points as the grease effectively removes the sway control. The dual cam setups like the Strait Line part # RP66074 that you referenced do not use friction as a way to control sway greasing them would not reduce the effectiveness. view full answer...
Yes, the Swivel Stik RV Black-Water Tank Rinser # CAM40074 is long enough and has the water pressure needed for your needs. The extension is 55-1/2 inches long and has a spinning nozzle so it will hit every corner of your black tank. If you check out the review I attached you can see how it works and how easy it is to use. view full answer...
I have a potential alternate option, but unfortunately, the Titan Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast T1721400042 is no longer available from the manufacturer. As this uses an uncommon combination of inner and outer bearings, I recommend replacing the axle with a more common set up.
With that said, the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # 35545I-ST-89 will come with idler hubs and includes all bearings, seals, caps,... view full answer...
The Curt # C45561 Euro-Style ball mount you referenced is exactly what you'll need. The ball mount will work fine with your # C11265 Class I hitch once it's installed. Keep in mind that the ball mount carries a 3500 lb towing/350 lbs tongue weight rating, but that your hitch is only rated for 2000 lbs towing/ 200 lbs tongue weight. Because of that difference in capacity between the hitch and the ball mount, you'll need to abide by the rating of the lower rated component, which would be... view full answer...
We offer trailer wheel center caps for both 4.25-inch and 4.27-inch pilot hole diameters so you might want to check your dimension. With small differences in size you might find it easier to do this with a digital caliper like # PTW80157.
In the 4.25-inch size we offer chrome-plated cap # 425EZ. In the 4.27-inch size we have chrome cap # AM90154 and stainless steel cap # AM90077. All can be seen on the linked page. view full answer...
Go To Results